Learning Math and Coding with Robots

Linkbot Image Mindstorm Image Cursor Image
0x2418126-6-12y2418126-6-12
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Axes: x-axis y-axis Show Grid
Grid: 24x24 inches 36x36 inches 72x72 inches
96x96 inches 192x192 inches
Quad: 4 quadrants 1 quadrant Hardware
Units: US Customary Metric
Background: Background Image

Robot 1

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 0 in)
Current Angle: 90 deg
Wheel Radius:
Track Width:
in

Robot 2

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Linkbot
Mindstorm
Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Modeling Linear Relations 3 in the Coordinate Plane
Problem Statement:

Change the initial position of the robot using the command window in the lower lefthand side (under the Coordinate Plane). Change the initial position of the robot so it starts 8 units to the right and 4 units down. Set the robot’s speed to 3 units per second and then drive the robot to y = 12.

/* Code generated by RoboBlockly v2.0 */
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

robot.traceColor("red", 4);
robot.setSpeed(3, radius);
robot.driveDistance(16, radius);
Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace
Problem Statement:

Change the initial position of the robot using the command window in the lower lefthand side (under the Coordinate Plane). Change the initial position of the robot so it starts 8 units to the right and 4 units down. Set the robot’s speed to 3 units per second and then drive the robot to y = 12.


		
Rubbish bin
Time