0x2418126y2418126
Grid:
Tics Lines:
Width px
Hash Lines:
Width px
Labels:
Font px
Trace Lines:
Robot 1:
Width px
Robot 2:
Width px
Robot 3:
Width px
Robot 4:
Width px
Axes: x-axis y-axis Show Grid
Grid: 24x24 inches 36x36 inches 72x72 inches
96x96 inches 192x192 inches
Quad: 4 quadrants 1 quadrant
Units: US Customary Metric
Background:

Robot 1

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 2

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 6 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 3

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 12 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Robot 4

Initial Position:
( in, in)
Initial Angle:
deg
Current Position: (0 in, 18 in)
Current Angle: 0 deg
Wheel Radius:
Track Width:
in

Applying Addition with Multiple Terms to Drive a Robot Forward
Problem Statement:
Modify the preplaced blocks so the robot will drive forward 10 units (blue line). You must use addition only. You can change all of the numbers or one, just make sure that all three numbers add up to 10.
/* Code generated by RoboBlockly v2.0 */
/* Problem Statement: 
    Modify the preplaced blocks so the robot will drive forward
    10 units (blue line). You must use addition only. You can
    change all of the numbers or one, just make sure that all
    three numbers add up to 10.*/
#include <linkbot.h>
CLinkbotI robot;
double radius = 1.75;

// Sample Solution
robot.driveDistance((2 + 6) + 2, radius);
Blocks Save Blocks Load Blocks Show Ch Save Ch Workspace
Problem Statement:
Modify the preplaced blocks so the robot will drive forward 10 units (blue line). You must use addition only. You can change all of the numbers or one, just make sure that all three numbers add up to 10.

		
Time